These past few months have brought more hardware woes, which have inspired me to update some of the things I said in the last blog on Windows 10.
I had a hard disk failure (Samsung SSD 850 PRO), which was under warranty, and has since been repaired, but not before I bought a new one. I was lucky to be completely backed up, and after I installed the new drive I was able to read the old one, although I never did get it to boot.
After refreshing my installation, I was still having some problems:
1) My computer was slow to POST, but that seems to have fixed itself. I'm not sure what I did that fixed it, but it seems to be OK now.
2) When coming out of hibernation or sleep mode, it freezes for a short time. I haven't figured out why.
3) I have had a lot of problems with that Creative X-Fi, and it may have been the driver that killed the old SSD. I finally ditched it, and have opted for an external option: a Focusrite Scarlett 2i2. You have to be careful with it. I read some instructions when installing it that you had to attach it to a USB3 port if you have an AMD CPU in your computer (which I do). That, I discovered, is only if you have version 1 of the unit. In fact, I discovered that with version 2, it is better to plug it into USB2. When I ordered it, I decided not to install it until I upgraded my SATAIII card to one that also has a USB3 port. I tried two, and one didn't work at all, but the second one did. Unfortunately, it was competing for bandwidth with my HD, and causing dropouts. In the end, I put the Scarlett on a USB2 port and started using ASIO4ALL to control it, rather that the Focusrite driver, which kept looping (in Sibelius or Finale). It also hogs the device, so I have been leaving the Directsound drive on by default, so it shares with other software. I'm not sure of the advantage of using ASIO just for playback anyway.
My laptop
About 5 years ago, I purchased an HP Split X2. It has become a little long in the tooth lately for two reasons: The SSD (system drive) is full. There is a second drive (SATA) in the keyboard, but if I separate the two, obviously, those files become unavailable. I've installed a 128 GB SD Card, and gotten around some of the problems, but I think there is a speed penalty there.
I decided that I would upgrade the SSD and the RAM. I was having difficulty opening the case and was afraid to do it, so I tried to find out what I can do online. Unfortunately, there are about 10 different model numbers for the Split X2, and I didn't know which was correct. The software gave me the official number, but that wasn't listed on the site.
Finally, I tried Crucial, who have an online checker for such things. It told me I could install an 8 GB kit (2x4GB), but it didn't look like the SSD was upgradeable. I was about to order the memory, and possibly take it to Best Buy to be installed, but then decided to try to open it up again. I was able to pry it open, and eventually discovered there were 4 screws hidden under the grille for the speakers (glued on). I carefully removed the grille, detached the screws and opened it up.
At first, I didn't see the memory or the SSD, then I found a small card partly covered up by a label that said Micron RealSSD C400 mSATA 128GB. That sounded like a hard disk to me, and I eventually discovered that it was. Replacing it with a larger one would proved difficult, although I eventually found a 256GB version on Ebay, so I ordered it. I wanted a 512GB, but never found one.
Next, the memory. I couldn't find it for the longest time, but eventually, I looked under the heatsink cover, and there it was ... soldered to the motherboard. So much for that idea.
So, it was the opposite of what Crucial said. The SSD could be upgraded, but not the memory. The SSD will arrive by Friday, and I've ordered an USB adapter to copy everything across. Should be (ahem) fun. At least, I'll have some headroom on the drive, so it should speed things up.
3 days ago
